DoC Event #007 – Revit Data Visualized with Dynamo

If you are going to be in Calgary over lunch on October 23rd then sign up for this FREE event to learn about using Dynamo to help visualize your Revit Data. This will be a fun and informative hands-on lab for Dynamo users of all levels including beginners. Registration details are at the bottom of the post, along with event details.

Date: Wednesday, October 23rd, 2019 – Lunch Edition!

Time: 11:30 am to 1:30 pm in meeting room 0-13 (Level 0)

Location: Calgary Central Library800 3 St SE, Calgary Alberta T2G 2E7

After the popularity of our last event that was held during lunch, we are doing it again. Come join us over lunch, grab a bite to eat, and bring your laptop to take part in an AU 2019 Preview hands-on lab for Dynamo and Revit. Both AU sessions of this lab have now SOLD OUT, so this is your last chance to take part in this lab!

Revit Data Visualized with Dynamo Presented by Carl Storms of IMAGINiT

Not able to make it to Autodesk University 2019 this year in Las Vegas? No worries the DoC has you covered with this AU 2019 Preview Hands-on Lab: Revit Data Visualized with Dynamo.

Bring your laptop and take part in this hands-on Lab, don’t worry no Dynamo experience needed to join in on the fun!
NOTE: All exercises were created using Revit 2020.1 and Dynamo Revit 2.1.0 (Core 2.2.1). Excel will also be used in some examples.
There will be a Dataset for Dynamo 2.0.x and Revit 2018 & 2019 available.

You must be able to attend in person, this even will not be able to be recorded or accessed remotely, sorry.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

Event Host Sponsor is:

Event Food and Beverage Sponsor is:

Come share your Dynamo story on May 15th at the DoC Show & Tell!

UPDATE: Get Dataset and Presentation Here

If you are going to be in Calgary over lunch on May 15th and would to share some of your Dynamo content, workflows or tips and tricks, then sign up for this free event and share with the community! If you just want to learn about Dynamo, then you too should signup for this free event and networking opportunity. Registration details at the bottom of the post, all the event details are below.

Don’t worry you don’t need to be a Dynamo pro to share at this Show & Tell all are welcome and encouraged to take part!

Wednesday, May 15th, 2019 – Special Lunch Edition!

11:30 am to 1:30 pm in meeting room 0-13 (Level 0)

Calgary Central Library800 3 St SE, Calgary Alberta T2G 2E7

For the first time ever we will be holding our next DoC event during lunch. Come join us over lunch, grab a bite to eat and learn what the release of Dynamo 2.1 means. We will also be doing a DoC member “Show and Tell” so if you have a great Dynamo graph, workflow, project, or tips and tricks to share with the group come on out!

 

Session #1

Dynamo 2.1 is out, what does it mean? Presented by Carl Storms of IMAGINiT

learn about what the release of Dynamo 2.1, along with Revit & Civil 3D 2020, FormIt Pro V17, and the new standalone Dynamo Sandbox means for your Dynamo graphs and workflows going forward.

Session #2

Dynamo Show and Tell by the DoC Members

Presented by YOU the Dynamaniacs of Calgary

We are looking for people to do a little Show and Tell of their latest Dynamo projects, workflows, graphs, favourite packages or just some good old tips and tricks. We are only looking for 5 or 10 minutes from each “Show and Teller”, and no fancy powerpoint or presentation required (but welcomed if you wish). There will also be a short session to kick off the meeting about Dynamo 2.1 so you don’t have to worry about going first. No worry, if you aren’t a Dynamo pro this show and tell session, is for Dynamanicas of all skill level…so step right up and share with the community.

So if you would like to share during the Show and Tell just register for the event below and check “Yes” in the box asking if you want to share, optionally you can also share your topic if you wish. There is also a “Maybe?” option just in case you’re not sure and want to make it a game-time decision.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

But wait there is more…

We will have some sweet DoC swag for those that attend: Stickers, Buttons, and Bumper Stickers.

Event Host Sponsor is:

Event Food and Beverage Sponsor is:

DoC Event #006 – We Want You!

UPDATE: Get Dataset and Presentation Here

We are having our first every DoC lunch event, and our first ever DoC member Show and Tell.

Which means…


If you are going to be in Calgary over lunch on May 15th and would to share some of your Dynamo content, workflows or tips and tricks, then sign up for this free event and share with the community! If you just want to learn about Dynamo, then you too should signup for this free event and networking opportunity. Registration details at the bottom of the post, all the event details are below.

Wednesday, May 15th, 2019 – Special Lunch Edition!

11:30 am to 1:30 pm in meeting room 0-13 (Level 0)

Calgary Central Library800 3 St SE, Calgary Alberta T2G 2E7

For the first time ever we will be holding our next DoC event during lunch. Come join us over lunch, grab a bite to eat and learn what the release of Dynamo 2.1 means. We will also be doing a DoC member “Show and Tell” so if you have a great Dynamo graph, workflow, project, or tips and tricks to share with the group come on out!

 

Session #1

Dynamo 2.1 is out, what does it mean? Presented by Carl Storms of IMAGINiT

learn about what the release of Dynamo 2.1, along with Revit & Civil 3D 2020, FormIt Pro V17, and the new standalone Dynamo Sandbox means for your Dynamo graphs and workflows going forward.

Session #2

Dynamo Show and Tell by the DoC Members

Presented by YOU the Dynamaniacs of Calgary

We are looking for people to do a little Show and Tell of their latest Dynamo projects, workflows, graphs, favourite packages or just some good old tips and tricks. We are only looking for 5 or 10 minutes from each “Show and Teller”, and no fancy powerpoint or presentation required (but welcomed if you wish). There will also be a short session to kick off the meeting about Dynamo 2.1 so you don’t have to worry about going first.

So if you would like to share during the Show and Tell just register for the event below and check “Yes” in the box asking if you want to share, optionally you can also share your topic if you wish. There is also a “Maybe?” option just in case you’re not sure and want to make it a game-time decision.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

But wait there is more…

We will have some sweet DoC swag for those that attend: Stickers, Buttons, and Bumper Stickers.

Event Host Sponsor is:

Event Food and Beverage Sponsor is:

DoC Event #005 – BILT North America Recap and Preview

UPDATE: Get Dataset and Presentation Here

Wednesday, March 20th, 2019

6:00 pm to 8:00 pm

GEC ArchitectureSuite 300, 2207 4th Street SW, Calgary, AB T2S 1X1

This, the fifth DoC event will be another busy night with two great sessions, both part of the BILT NA theme of the night.

Session #1

BILT NA 2018 Recap Presented by Carl Storms of IMAGINiT (remotely) – Eddy will also be adding his thoughts on BILT NA 2018. (Live)

BILT NA 2019 Preview Presented by Robert Bell the BILT NA Chairman (remotely)

Session #2

“The Simpleton’s Guide to MEP Macros”
This is a BILT NA 2018 Session

Presented by Eddy Bussiere of SMP Engineering (Live)

The presentation PDF and datasets will be available after the event via this website.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

 

Event Host Sponsor is:

Event Food and Beverage Sponsor is:

DoC Event #004 – Two Topics = One Great Night of Dynamo with Zach Kron and Carl Storms

UPDATE: Get Dataset and Presentations Here

& Watch Zach’s Presentation Video Here

Wednesday, October 24th, 2018

6:00 pm to 8:00 pm

GEC ArchitectureSuite 300, 2207 4th Street SW, Calgary, AB T2S 1X1

This, the fourth DoC event, and the first of the 2018 – 2019 season will be a remote presentation by Zach Kron from Autodesk & a live lab by Carl Storms from IMAGINiT.

Session #1

What’s New With Dynamo 2.0

Presented by Zach Kron of Autodesk (remote session)

Session #2

Dynamo – Everyone’s Doing It Vol. 3 – Attach of the Data
A hands-on lab created by Carl Storms for BILT ANZ & Data Day

Presented by Carl Storms of IMAGINiT (Live Session)

If you want to join in on the lab please bring your own laptop with Revit 2018 and Dynamo installed, datasets will be provided.

The presentation PDF and datasets will be available after the event via this website.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

Event Host Sponsor is:

Event Food and Beverage Sponsor is:

A Top 10 for Teaching Dynamo by Colin McCrone

This is a post by Colin McCrone that went up on the Dynamo Blog today. It’s a great read for anyone, but really helpful for those that have been tasked with teaching others how to use Dynamo.

Head over to the Dynamo Blog and check it out!

Ten Commandments for Teaching Dynamo by a Former “Evangelist”

 

Until next time Dynamaniacs…

DoC Event #003 – Code vs. Node: Smackdown! with Eddy Bussiere & Carl Storms

Update: Dataset here

Wednesday, October 11th, 2017

6:00 pm to 8:00 pm

GEC ArchitectureSuite 300, 2207 4th Street SW, Calgary, AB T2S 1X1

This, the third DoC event, and the first of the 2017- 2018 season will be a live presentation by Eddy Bussiere from SMP Engineering & Carl Storms from IMAGINiT, both will be supporting one side of the “Code vs. Node” debate.

Eddy will be presenting the “Code” side of the debate talking about using C# code to make macros for Revit, that will help automate or otherwise improve your Revit workflow. Carl will be speaking on behave of the “Node” side of the debate showing how Dynamo can also be used, without the need for coding, to help automate or otherwise improve your Revit workflow.

This is will be a grudge match for the ages that you will not want to miss!

The idea for this event came from a session at this years BILT North America called – Code vs. Node: The Ultimate Revit Automation Smackdown! presented by Michael Kilkelly, who has been nice enough to let us deliver our version of his topic.

Michael runs a great website called ArchSmater that you should check out if you like what you see, some of the things he overs include Macro’s, Dynamo, Revit Templates, and even has his own custom Revit add-ons.

Register today for this FREE event by clicking the banner below, or going to www.dynamaniacsyyc.ca/next-event/

Event Site Sponsor is:

Event Food and Beverage Sponsor is: